Distance Regulation Control Module
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware corroded, affecting structural integrity | A | Require replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Connector (Weatherpack type) leaking | A | Require repair or replacement |
| Connector broken | A | Require repair or replacement |
| Connector melted | A | Require replacement |
|
NOTE:
Determine cause and correct prior to replacement of part.
|
||
| Connector melted | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Connector missing | C | Require replacement |
| Contaminated | A | Require repair or replacement |
|
NOTE:
Determine source of contamination, such as engine coolant, fuel, metal particles, or water. Require repair or replacement.
|
||
| Dust boot missing | C | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure
|
||
| Dust boot split | A | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure.
|
||
| Dust boot torn | A | Require replacement of boot |
|
NOTE:
If boot is not available separately, suggest replacement of sensor (reason code 2). This condition can lead to damage of the sliding magnet, which, in turn, causes premature sensor failure.
|
||
| Housing cracked | B | Require replacement |
| Inoperative | A | Require repair or replacement |
|
NOTE:
Inoperative includes intermittent operation. Some components may be serviceable; check for accepted cleaning procedure.
|
||
| Lead routing incorrect | B | Require rerouting according to vehicle manufacturer's specifications |
| Loose | B | Require adjustment to vehicle manufacturer's specifications |
| Malfunctioning | A | Require replacement |
|
NOTE:
includes inoperative, intermittent operation, failure to perform all functions, out of OEM specifications, or out of range.
|
||
| Missing | C | Require replacement |
| Output signal incorrect | B | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, affecting performance | A | Require repair or replacement |
|
NOTE:
Determine cause and correct prior to repair or replacement of part.
|
||
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
| Wire lead burned | A | Require repair or replacement |
| Wire lead conductors exposed | B | Require repair or replacement |
| Wire lead open | A | Require repair or replacement |
| Wire lead shorted | A | Require repair or replacement |