Suspension Pumps (Hydraulic)
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Binding | A | Require repair or replacement |
| Fluid at or beyond service interval | 3 | Suggest fluid change |
| Fluid contaminated | B | Require flushing and refilling of the system |
|
NOTE:
Determine and correct source of contamination. OEM specifications must be followed for fluid type.
|
||
| Fluid level incorrect | B | Require adjustment of fluid level |
| Leaking | B | Require repair or replacement |
| Noisy | 2 | Suggest repair or replacement |
| Pulley bent | A | Require repair or replacement of pulley |
| Pulley missing | C | Require replacement of pulley |
| Pump output out of manufacturer's specifications | A | Require repair or replacement |
| Remote reservoir leaking | A | Require replacement of reservoir |
| Reservoir cap broken | A | Require replacement of cap |
| Reservoir cap missing | C | Require replacement of cap |
| Seized | A | Require replacement |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |