TPMS Reminder Reset - Procedure 01
NOTE:
In order for the tire pressure monitoring system to work, the specified pressures (provided on tire pressure label) must be reprogrammed after every change in air pressure.
NOTE:
Whenever tire pressure is adjusted (i.e., when readjusting tire pressure for a load condition), or after every wheel change, the adjusted pressure has to be stored again. See appropriate Tire Pressure Monitor System Reminder Reset procedure.
- Ensure air pressure in all tires (including spare tire) is properly adjusted to specification.
- On the center instrument cluster display, press the MENU button. See Fig 1.
- Push the turn-switch to select "SET" option. See Fig 2.
- Turn the switch to scroll to "TYRE PRESSURE", then push switch. See Fig 3.
- Push the switch again to select "STORE PRESSURES". See Fig 4. After the tire pressures have been saved, the system will measure the actual pressures once again, and then save these as the new pressures.
