Overview - Ignition System
- Bolt
- 22 Nm
- Knock Sensor 1 -G61-
- Removing and Installing. Refer to Knock Sensor 1 -G61-, REMOVING AND INSTALLING .
- Spark Plug
- 27.5 Nm
- Spark Plug Connectors
- Ignition Coil
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and Installing. Refer to IGNITION COILS, REMOVING AND INSTALLING .
- Double Bolt
- In the existing threads: 9 Nm
- In the new tapping threads: 10 Nm
- Thread cutting
- Nut
- 9 Nm
- Bolt
- In the existing threads: 9 Nm
- In the new tapping threads: 9 Nm
- Thread cutting
- Camshaft Position Sensor 3 -G300-
- Removing and Installing. Refer to Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING .
- Check the O-ring for damage
- O-Ring
- Not available separately; replace if leaking -item : Camshaft Position Sensor 3 -G300- or damaged
- O-Ring
- Not available separately; replace if leaking -item : Camshaft Position Sensor -G40- or damaged
- Camshaft Position Sensor -G40-
- Removing and Installing. Refer to Camshaft Position Sensor -G40-, REMOVING AND INSTALLING .
- Check the O-ring for damage
- Bolt
- 9 Nm
- O-Ring
- Not available separately; replace if leaking -item : Engine Speed Sensor -G28- or damaged
- Engine Speed Sensor -G28-
- Removing and Installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- Check the O-ring for damage
- Bolt
- 4 Nm +45°
- Replace after removing