Throttle Valve Control Module -GX3-, REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Loosen the screw-type clamp -2-, remove the air duct pipe from the Throttle Valve Control Module -GX3- downward and slightly push it to the side (example illustration).

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

Fig 1: Identifying Throttle Valve Control Module Electrical Connector And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the Throttle Valve Control Module -GX3-.