After-Run Coolant Pump -V51-, REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- If necessary, remove the bolts -arrows- for the bracket -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Place a cloth underneath to catch leaking coolant.

-- Loosen the hose clamps -2-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm: 3094  and remove them.

-- Remove the bolts -arrow- and the After-Run Coolant Pump -V51-.