Starter, Removing And Installing, Vehicles With 2.0L TDI Engine (0K4): Installing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and Note The Following :

-- Check the sealing piece -arrow- for the correct installation position.

TIP:

If the starter assembly is difficult to move, use a silicone-free lubricating spray.

Fig 1: Identifying Bolt & Spacer Sleeve

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

There is a risk of damaging the starter through improper handling.

- Tighten the bolt only with the spacer sleeve installed between the starter and the transmission.

-- Connect the battery. Required actions. Refer to Connecting .