GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING, 0K2: Removing

-- Switch off the ignition.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the cover -1- to the side.

-- Loosen the nut -2- several turns and remove the battery ground cable clamp from the battery negative terminal.

Fig 1: Locating Ground Cable With Battery Monitoring Control Module -J367-

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3-.

-- Free up the connector -5-.

-- Remove the nut -6- and remove the ground cable -4- with the Battery Monitoring Control Module -J367- -1-.

-- Guide out the ground wire forward.