Battery -A-, REMOVING AND INSTALLING, 0K4 AND VH0: Removing
-- Remove the nut -1-, the cover -3- with the vehicle tool kit mount -2-.
-- Avant: if installed, remove the subwoofer. Refer to SOUND SYSTEM .
-- Equipment version without subwoofer: remove the nuts -arrows-.
-- Equipment version with subwoofer, remove the subwoofer. Refer to SUBWOOFER -R211-, REMOVING AND INSTALLING .
-- Remove the rear crashpad -2- with the retaining bracket -1-.
-- Remove the bolts -arrows-.
-- Remove the retaining bracket -1-.
-- Loosen the nut -6- several turns and remove the battery ground cable terminal -4- from the battery terminal.
-- Disconnect the connector -5-.
-- Check that it is de-energized on the jump-start connection point using the multimeter. Refer to Check that it is de-energized on the jump-start connection point using the multimeter: .
-- Open the cover -3- over the battery positive terminal.
-- Loosen the nut -1- several turns and remove the battery positive cable terminal clamp -2- from the battery terminal.
-- Remove the bolt -3-.
-- Remove the battery bracket -4-.
-- Disconnect the central venting system hose -1-.
-- Lift the battery -2- up and out of the luggage compartment.
- The disposal regulations for batteries and sulfuric acid must be followed when disposing of batteries. Refer to BATTERY .




