All-Wheel Drive Clutch, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Check the O-ring -1- on the all-wheel drive clutch input shaft -2- for damage and if necessary replace.

Courtesy of AUDI OF AMERICA, LLC

-- Apply a thin layer of Sealing Grease on the splines of the all-wheel drive clutch input shaft.

-- Place the all-wheel drive clutch -1- on the transmission and tighten the bolts -arrows- hand-tight.

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- diagonally to the tightening specification.