Gear Oil Level, Checking, 0DB, 0D2 And 0G1 / 0G2

Special tools and workshop equipment required 

• Drip Tray

-- Remove the oil filler plug -arrow A- to check the gear oil.

Courtesy of AUDI OF AMERICA, LLC

The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.

• Transmission fluid specification. Refer to CAPACITIES .

-- Install the plug -arrow A- and tighten it. Tightening specification Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0DB, 0D2 AND 0G1 / 0G2 .