GEAR OIL LEVEL, CHECKING, 0D3 "quattro sport" AND 0BX "quattro sport"
Test requirement
- Gear oil temperature: 10 °C to 60 °C (50 °F to 140 °F)
- The rear final drive must be in the installed position.
- The vehicle must be level.
- Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS, 0D3 "quattro sport" AND 0BX "quattro sport"
Special tools and workshop equipment required
- Drip Tray
-- Remove the gear oil check plug -1-, located on the right side of the final drive.
- The oil level is correct when the rear final drive is filled up to the lower edge of the oil fill hole.
- Refer to the Parts Information for the correct transmission fluid specification.
-- If necessary, fill the gear oil.
- Refer to GEAR OIL, DRAINING AND FILLING
-- Install and tighten the gear oil check plug -1-. Tightening specification -item : Gear Oil Check Plug.
