INPUT SHAFT SEAL, REPLACING, 0DB, 0D2, 0G2, 09R "quattro ultra", 0B0 "quattro ultra": Notes

Special tools and workshop equipment required 

• Puller - Multiple Use: VW 391 
  Fig 1: Puller - Multiple Use VW391

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer Set - Adapter 40: VW 771/40  from the Slide Hammer Set: VW 771 
  Fig 2: Identifying Slide Hammer Set

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Unit Injector: T10055 
  Fig 3: Identifying Puller T10055

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Hollow Shaft: T10380 
  Fig 4: Identifying Thrust Piece - T10380-

  Courtesy of AUDI OF AMERICA, LLC
• -2- Puller - Unit Injector - Adapter 2: T10055/2 
• Guide Sleeve: T40222/1 
  Fig 5: Assembly Tool T40222

  Courtesy of AUDI OF AMERICA, LLC
• Inductive Heater: VAS 6414 
  Fig 6: Identifying Inductive Heater VAS 6414

  Courtesy of AUDI OF AMERICA, LLC
• or
• Commercially Available Hotplate with Digital Thermometer: VAS 6519 
  Fig 7: Identifying Digital Thermometer VAS 6519

  Courtesy of AUDI OF AMERICA, LLC
• Used Oil Collection and Extraction Unit: SMN372500 
  Fig 8: Identifying Used Oil Collection And Extraction Unit

  Courtesy of AUDI OF AMERICA, LLC
• Sealing Grease: G 052 128 A1 
• Two M 8 x 30 Bolts