Outer Door Seal, Removing And Installing, A4: Removing

-- Remove the front window frame trim panel. Refer to WINDOW FRAME TRIM PANEL, REMOVING AND INSTALLING .

-- Mark the position of the outer door seal -1- all around with adhesive tape -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Tape off the A-pillar in the door arrester area using adhesive tape, so that the paint will not be damaged.

Fig 1: Door Arrester Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the door arrester bolt -arrow-.

-- Pull the outer door seal -1- slightly away from the top of the door frame and cut it with commercially available scissors.

Fig 2: Bend And Remove Door Outer Seal Laterally

Courtesy of AUDI OF AMERICA, LLC

-- Gradually stretch the outer door seal lengthwise in direction of -bottom arrow- and remove it in direction of -upper arrow-.

TIP:

Pulling the outer door seal lengthwise will loosen the outer door seal adhesive and then it is possible to remove it from the door without any adhesive residue.

-- Remove the outer door seal completely.