Exterior Rearview Mirror, Removing And Installing: Removing
-- Move the door window into the "closed" position.
-- Remove the bass speaker. Refer to COMPONENT LOCATION OVERVIEW - SOUND SYSTEM .
-- Disconnect the connector -1-.
-- Free up the wiring harness -5- -arrows- to do so rear side the clip from the rear side using a 6 mm socket.
-- Equipped on some models: push the protective cover to the side and disconnect the connector -2-.
-- Pry out the grommets -3 and 4-.
TIP:
Shown on vehicle before product improvement
-- Release the catch in direction of -arrow A- and remove the connector -2- from the connector housing -1- in direction of -arrow B-.
-- Pry out the grommet -2-.
-- Remove the nuts -1-.
TIP:
Shown on vehicle before product improvement
-- Remove the cable holder -arrows- from the door shell and free up the wiring harness -2-.
-- Remove the mirror adjustment unit mount and guide the wiring harness with the grommet outward through the door shell and behind the guide rail -1- at the same time.
Cover, Removing:
-- Remove the bolts -1 and 3-.
-- Release the retainers -arrows- and remove the mirror base cover -2-.




