Side Adjustment, Checking using :

Fig 1: Side Adjustment, Checking Using : T40038/20

Courtesy of AUDI OF AMERICA, LLC

Minimum Side Adjustment Tolerance, Checking: 

-- Position the template on the body measuring point. Refer to Door Adjustment, Checking using : .

• "min" lettering on the template faces toward the vehicle.

-- The template contact points -B and C- must rest on the door window.

• Point -A- should contact the roof edge, but a small gap is permitted.

-- If point -A- does have a gap at the roof edge, the maximum tolerance must be checked.

Maximum Side Adjustment Tolerance, Checking: 

Courtesy of AUDI OF AMERICA, LLC

-- Position the template on the body measuring point. Refer to Door Adjustment, Checking using : .

• "max" lettering on the template faces toward the vehicle.

-- The template contact points -A and C- must rest on the door window and on the roof edge.

-- Contact point -B- may rest either on the door window, or there may be a gap.

• Adjustment is OK.

-- If it is not OK, the door projects too far outward and must be adjusted.