New Window Glass, Preparing For Installation: Notes

Special tools and workshop equipment required 

• Cleaning Solution: D 009 401 04 

-- Clean the adhesive surface with Cleaning Solution: D 009 401 04  and let dry.

• The vehicle and the window glass must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.
• The surface must be primed before applying adhesive.
• Primer is electrically conductive and therefore must not touch the bus bar on the rear window defogger, for example.
• The window glass must be inserted within 15 minutes of applying the sealant.

Primer, Applying:

Fig 1: Applying Glass/Paint Primer D 009 200 02

Courtesy of AUDI OF AMERICA, LLC

-- Using the applicator -2-, apply Glass/Paint Primer: D 009 200 02  -3- evenly and in one stroke near the molding -1- on the window glass -4- and let it dry for ten minutes.

• Begin applying with a saturated piece of felt.
• Primer width 20 mm.
• The glass/paint primer must be centered to the adhesive bead.
• Drying time: 10 minutes