Adjustment Dimension, A5 Cabriolet
Door Window to the A-Pillar
- Gap dimension -a- = 12.4 ± 1.0 mm
- Gap dimension -b- = 6.7 +1.5/ -1.0 mm
- Dimension -c- = 20 mm, measured from the impression in the door seal
-1- Door window
-2- Inner door seal
Door Window to the A-Pillar
- Gap dimension -e- = 12.4 ± 1.0 mm
- Gap dimension -f- = 7.1 +1.5/ -1.0 mm
- Dimension -d- = 20 mm, measured from the impression in the door seal
-1- Door window
-2- Inner door seal
Door window to convertible top
- Gap dimension -h- = 6.2 mm
- Gap dimension -g- = 5.7 mm
- Dimension -j- = 100 mm, measured from the center of the side window seal
-1- Door window
-3- Convertible top seal
Door Window to Side Window
- Flush dimension -k- = ± 0.7 mm
- Gap dimension -I- = 10.2 + 1.0 mm
- Parallel alignment = 0.9 mm.
-1- Door window
-4- Side window