Checking the side adjustment to the roof trim molding inner edge:

Courtesy of AUDI OF AMERICA, LLC

-- Determine the measuring point on the door window:

• Dimension -a- = 294.5 mm measured from the center of the inner door seal -1-. Refer to ADJUSTMENT DIMENSIONS - Dimension -e- = 294.5 mm measured from the center of the inner door seal .

-- Place the : VAS6335  at the measured points on the inner door seal -1- and measure the dimension -x- to the door window -2-.

Fig 1: Measuring Door Window Dimension

Courtesy of AUDI OF AMERICA, LLC

• Dimension -c-. Refer to ADJUSTMENT DIMENSIONS - Gap dimension -c- = 5.6 mm .

-- Adjust the door window again if the first adjustment is not OK. Refer to SIDE ADJUSTMENT .