Inner Door Seal Bracket, Removing And Installing: Installing

• The vehicle and the bracket must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.

-- Remove the adhesive residue from the body.

-- Clean the painted side of the adhesive surface with Cleaning Solution :D 009 401 04  and let dry.

-- Align the bracket -1- for the inner door seal on the body seam -3-.

Courtesy of AUDI OF AMERICA, LLC

• The raised section -4- on the body seam must align with the opening -arrow- on the bracket.

-- Remove the protective film from the adhesive tape -2-.

-- Press on the entire length of the bracket.

• Resting time approximately 30 minutes at room temperature