Interior Door Mechanism Operating Cable, Removing And Installing: Removing
-- Move the door window into the "closed" position.
-- Driver side: remove the lock cylinder. Refer to LOCK CYLINDER, REMOVING AND INSTALLING .
-- Remove the door inner cover. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
-- Remove the screws -arrows-.
CAUTION:
Risk of damaging the operating cable by deforming it.
- Never sharply bend or kink the operating cable.
-- Push the door lock -1- to the side and disconnect the connector.
-- Disengage the release cable -3- from the door lock cable bracket -2- in direction of -arrow A-.
-- Turn the nipple -1- 90° in the direction of -arrow B- and remove it from the door opener release lever -4-.