Backrest Heating Element, Removing And Installing
The old seat heating element remains on the cushion and will be covered by the new heating element.
This procedure may contain mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Procedure
- Cover and cushion separated. Refer to BACKREST COVER AND CUSHION, SEPARATING .
-- Cut the wire directly on the old heating element.
Standard/Sport Seat:
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
-- Route the connecting wires to the individual heating elements in the base of the gaps.
The Sport seat is shown.
Super Sport Seat:
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
-- Route the connecting wires to the individual heating elements in the base of the gaps.
Further installation is the reverse order of removal.