Overview - Front Backrest, Standard Seat, China Version

Fig 1: Exploded View Of Front Backrest (Standard Seat/Sport Seat)

Courtesy of AUDI OF AMERICA, LLC

1. Seat Pan
2. Bolt
   • 33 Nm
   • Quantity: 2
   • Self-locking
   • Replace after removing.
   • Threaded holes for the bolts must be cleaned, for example, with a thread tap
3. Backrest
   • Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
4. Headrest
   • Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, STANDARD SEAT, CHINA VERSION .
5. Backrest Cover
   • Vehicles with cargo net: the cargo net cannot be separated from the backrest cover.
   • Removing and installing. Refer to BACKREST COVER, REMOVING AND INSTALLING, STANDARD SEAT, CHINA VERSION .
   • Attach to the top of the backrest frame and then press on it until it audibly locks
6. Bolt
   • 33 Nm
   • Quantity: 2
   • Self-locking
   • Replace after removing.
   • Threaded holes for the bolts must be cleaned, for example, with a thread tap
7. Wiring Harness
   • From the thorax airbag to the connector station
   • Depending on the vehicle version, there may be more wiring harnesses, such as for the backrest heating