Overview - Backrest Adjustment Motor, Standard Seat, China Version

Fig 1: Exploded View Of Backrest Adjustment Motor, Standard Seat, China Version

Courtesy of AUDI OF AMERICA, LLC

1. Pop Rivet
   • Quantity: 2
2. Bracket
   • Riveted with the backrest frame
3. Bolt
   • 8 Nm
   • Equipped on some models
4. Adjustment Shaft
   • The threaded piece for the nut -item 9- must be cleaned, for example, with a thread tap.
   • Coat the threads on the adjustment shaft with locking fluid before installing the nut. Refer to the Parts Information.
5. Driver Backrest Adjustment Motor -V45-
   • Front passenger side: Front Passenger Backrest Adjustment Motor -V46-
   • Removing and installing. Refer to DRIVER AND FRONT PASSENGER BACKREST ADJUSTMENT MOTOR -V45- / -V46-, REMOVING AND INSTALLING, STANDARD SEAT, CHINA VERSION .
6. Bolt
   • 7.5 Nm
   • Replace after removing.
   • Clean the threaded hole for the bolt with a thread tap, for example
   • Use locking fluid when installing the bolt. Refer to the Parts Information for the locking fluid.
7. Backrest Frame
8. Washer
   • Equipped on some models
9. Nut
   • 8 Nm
   • Equipped on some models
   • Replace after removing.
10. Bolt
    • 8 Nm
    • Equipped on some models