QUATTRO Name Badge, Removing, A4 ALLROAD From Product Improvement: Installing

Install in reverse order of removal and note the following:

• The mount and the name badge must be at room temperature.
• The adhesive surfaces must be free of dirt and grease.

-- Remove the adhesive residue.

-- Clean the adhesive surface with Cleaning Solution: D 009 401 04  and let dry.

-- Remove the protective film from the adhesive tape -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Position the name badge -1- over the tabs on the mount -3- in direction of -arrows-.

-- Press the name badge on the mount.

• Resting time approximately 30 minutes at room temperature