Outer Instrument Panel Vent, Removing And Installing: Removing

-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the bolt/expanding clip -1- .

-- Loosen the trim -2- with the A/C display control head using the :T10383/1  in the area of the gap cover in direction of -arrows- .

-- Remove the light switch trim. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .

-- Move the steering wheel as far to the rear and down as possible. Use the full steering column adjustment range for this.

-- Using the :3409  , unclip the steering column trim panel gap cover -1- from the instrument panel vent in direction of -arrows- .

-- Remove the bolts -1 and 3- .

-- Unclip the instrument panel vent -2- using the :3409  in direction of -arrow- .

-- Disengage the remaining retainers, carefully remove the instrument panel vent and disconnect the connectors.