Battery Charger :VAS5906 DEVICE DESCRIPTION

VAS5906

Fig 1: Battery Charger VAS5906

Courtesy of AUDI OF AMERICA, LLC

The :VAS5906  was developed especially for charging the vehicle electrical system while the vehicle is on display.

It supplies for automatic charging of 3 - 300 Ah for starter batteries.

The 14.4 V maximum charging voltage is not exceeded. All electrical consumers will be supported up to 30 A by the support charging.

After the Battery -A- is completely charged, the :VAS5906  switches into the maintenance charging for long-term operation.

The :VAS5906  starts automatically and does not need any adjustments. Only the charging terminals and the network cable need to be connected.

For more information. Refer to the :VAS5906  Operating Instructions.

Control Field Overview

Fig 2: Identifying Control Panel Overview

Courtesy of AUDI OF AMERICA, LLC

1. 25% charge display
2. 50% charge display
3. 75% charge display
4. 100% charge display
5. Ready-to-use display
6. Pushing the START/STOP  and Setup  buttons will stop and start the charging process. Enter into the setup menu and select characteristic line type (hold for 10 seconds)
7. Display malfunction