Voltage Regulator, VALEO Generator From 2001, Removing And Installing: Installing

Fig 1: Pressing Off Protective Cap From Voltage Regulator

Courtesy of AUDI OF AMERICA, LLC

-- Press the protective cap -2- off of the voltage regulator -1- in direction of -arrow-.

-- When installing the voltage regulator, make sure the carbon brushes rest correctly on the slip rings.

-- Install the protective cap with the voltage regulator installed.

Install in reverse order of removal, observing the following:

-- Install the generator. Refer to GENERATOR, REMOVING AND INSTALLING .

• Tightening specification. Refer to OVERVIEW - VALEO GENERATOR FROM 2001 .