Auxiliary Battery -A1-

Fig 1: Exploded View Of Auxiliary Battery -A1-

Courtesy of AUDI OF AMERICA, LLC

Retaining Bracket
- For the vehicle tool kit cover
Grommet
- For the pressure vent tube
Pressure Balance Hose
Positive Cable
- Nut: 18 Nm
- Disconnecting and Connecting. Refer to Battery -A-, REMOVING AND INSTALLING, 0K4 AND VH0 .
Bolt
- 4 Nm
- Quantity: 3
Front Crashpad
Retaining Bracket
Bolt
- 4 Nm
- Quantity: 2
Cover Plate
Positive Cable Cap
Ground Wire
- Nut: 18 Nm
- Disconnecting and Connecting. Refer to Battery -A-, DISCONNECTING AND CONNECTING, 0K4 AND VH0 .
Nut
- 18 Nm
Auxiliary Battery -A1-
- Lithium-ion battery
- Checking that it is de-energized. Refer to Check that it is de-energized on the jump-start connection point using the multimeter: .
- Removing and Installing. Refer to Auxiliary Battery -A1-, REMOVING AND INSTALLING, (VH0 + 0K4) .
Retaining Bracket
Protective Housing
- For Auxiliary Battery -A1-
- Removing and Installing. Refer to PROTECTIVE HOUSING FOR Auxiliary Battery -A1-, REMOVING AND INSTALLING, 0K4 AND VH0 .
Bolt
- 8 Nm
Bolt
- 20 Nm
Bolt
- Tightening specification. Refer to Battery -A-
Retaining Bracket
Nut
- 4 Nm
- Quantity: 3
Rear Crashpad