48 Steering Wheel Heater Is Not Working, DTC B145504 Is Stored In The Steering Column Control Module (GROUP 48, NO. 22-23)
Reference number: GROUP 48, NO. 22-23
Supersedes refnos: 2053869/1, 2053869/2, 2053869/3, 2053869/4, 2053869/5, GROUP 48, NO. 19-77, GROUP 48, NO. 19-78, GROUP 48, NO. 20-85, GROUP 48, NO. 20-91
48 STEERING WHEEL HEATER IS NOT WORKING, DTC B145504 IS STORED IN THE STEERING COLUMN CONTROL MODULE
TECHNICAL SERVICE BULLETIN
| AUDI: | 2016 - 2023 All Models |
| GROUP: | 48 - Steering |
SERVICE INFORMATION
48 22 23 2053869/5 March 9, 2022. Supersedes Technical Service Bulletin Group 48 number 20-91 dated October 27, 2020, for reasons listed below.
| Model(s) | Year | VIN Range | Vehicle-Specific Equipment |
|---|---|---|---|
| All Models | 2016 - 2023 | All | Heated steering wheel |
CONDITION
| Revision | Date | Purpose |
|---|---|---|
| 5 | - | Revised header (Added Model Year) |
| 4 | 10/27/2020 | Revised header (Added Model Year) |
| 3 | 03/11/2020 | Revised header (Corrected Elsa display issue) |
Customer states:
- The heated steering wheel is not working.
- A steering wheel warning malfunction in the cluster.
Workshop findings:
The following DTC may be stored in the steering column electronics control module, J527 (address word 0016):
- DTC B145504 (Temperature sensor of steering wheel heating defective) (active/static) or (passive/sporadic) with symptom code 7340800.
TECHNICAL BACKGROUND
The steering wheel heating can switch itself off after 5 minutes under certain conditions. To switch it on, the customer must press the button of the steering wheel heater or an ignition cycle has to take place.
Environmental conditions (such as direct sunlight, high temperatures, etc.) can also lead to the premature deactivation of the steering wheel heating.
PRODUCTION SOLUTION
Not applicable.
SERVICE
Clear the DTC and release the vehicle. Do not replace the steering wheel.
WARRANTY
| Claim Type: |
|
||
| Service Number: | 4810 | ||
| Damage Code: | 0040 | ||
| Diagnostic Time: | GFF | 0150 0000 | Time stated on the diagnostic protocol (Max 30 TU) |
| Road test prior to service procedure | No allowance | 0 TU | |
| Road test after service procedure | No allowance | 0 TU | |
| Claim Comment: | As per TSB 2053869/5 | ||
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty.
ADDITIONAL INFORMATION
All parts and service references provided in this TSB (2053869) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2022 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies, and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher.