Speaker Trim, Removing And Installing

Special Tools And Workshop Equipment Required 

• Wedge Set:T10383 

Center Speaker Trim, Removing:

Fig 1: Speaker Trim

-- Detach the speaker trim -1- using the :T10383/1  in direction of -arrow- by sliding the wedge approximately 2 mm in the seam under the speaker trim.

-- Disengage the remaining tabs for the speaker trim along the seam.

-- If necessary, insert a long screwdriver forward under the speaker trim and disengage the front retaining pin.

Outer Speaker Trim, Removing:

Fig 2: Outer Speaker Trim

-- Using the :T10383/1  , carefully detach the speaker trim -1- along the seam in direction of -arrow- by inserting the wedge approximately 2 mm into the seam under the speaker trim.

-- Release the remaining retainers for the speaker trim and remove it.

Installing

Install in reverse order of removal.