Luggage Compartment Cover Motor, Removing And Installing: Removing

-- Remove the rear luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING .

-- Remove the lock carrier trim panel. Refer to LOCK CARRIER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the luggage compartment side trim panels. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, AVANT .

-- Remove the D-pillar trim panels. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING, AVANT .

-- Release the connector safety catch and disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

g-tron:

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector safety catch and disconnect the connector -1-.

-- Remove the nuts -arrows-.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3-.

-- Unclip the guide rail -1- using the :3409  in direction of -arrow- and disengage the release cables at the brackets.

-- Repeat the procedure on the opposite side.

-- Disengage and remove the guide rails with the luggage compartment cover motor.