Sunroof Shade, Removing And Installing, A4 Market-Specific Version: Installing

• The sunroof shade must be rolled up.

-- Insert the guide -1- at the left and right in the pin -2- on the sunroof frame in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

• The carrier at the left and right must engage on the sunroof frame in the cut-out on the guide -arrows-.

  Courtesy of AUDI OF AMERICA, LLC

-- Push the left and right guide -1- toward the front in direction of -arrow- and engage.

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -2-.

Install in reverse order of removal. Note the following:

-- Perform an adaptation. Refer to Sunroof Shade Motor -V260-, ADAPTING .