Brake Caliper, Replacing, 1LJ, 1LL, 1ZA And 1ZC: Notes
Special tools and workshop equipment required
- Torque Wrench 1332 40-200Nm :VAG1332
- Torque Wrench 1410 :VAG1410
- Brake Pedal Actuator :VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit :VAS5234
- M10 plug or M12 from the Assembly Part Set :5Q0 698 311
NOTE:
Clean bolts before reusing.
Replace damaged bolts.
Always replace self-locking bolts.
Coat the brake pad guides in the brake caliper with Lithium Grease :G 052 150 A2 .
Do not lubricate the seals for brake pistons and rubber components.
NOTE:
The brake caliper is removed and disconnected from the hydraulic system in the following description. The brake hose is removed.