Rear Brake Rotor, Removing And Installing: Installing
Install in reverse order of removal and note the following:
-- Check the brake rotors for wear and damage before reusing them:
- Brake rotor wear limit. Refer to TECHNICAL DATA .
-- Thoroughly clean the brake rotor and hub contact surfaces and clear them of corrosion.
NOTE:
Greasing the contact surfaces of the brake rotor and the wheel hub is not permitted.
-- Do not tilt the brake rotor when mounting it on the wheel hub.
-- Tighten the bolt -arrow-.
-- Install the brake caliper. Refer to REAR BRAKE CALIPER, REMOVING AND INSTALLING .
WARNING:
Risk of accident!
- With the vehicle stationary, firmly press the brake pedal several times so that the brake pads in the operating condition properly sit in their respective position.
- Make sure the brakes are working correctly before driving the vehicle for the first time.