Removing the instrument cluster (KOMBI)

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: 61 35... NOTES for ESD protection (electrostatic discharge)

Preliminary works

Deactivate the 48 v ELECTRICAL SYSTEM .
Disconnect all battery EARTH LEADS .
Remove the left instrument panel SIDE PANEL .
Remove the left instrument PANEL FINISHER .
Remove the right instrument panel SIDE PANEL .
Remove the right instrument PANEL FINISHER .
Remove upper section steering column SHROUD .

Loosen screws (1).
Feed out instrument cluster (KOMBI).

Courtesy of BMW OF NORTH AMERICA, INC.

Courtesy of BMW OF NORTH AMERICA, INC.
NOTE:
RISK OF DAMAGE
Damage to the instrument cluster (KOMBI) or the head unit
While releasing and connecting the cable, it could lead to a ground offset. This can generate currents that render the instrument cluster (KOMBI) or the head unit unusable.
- While releasing: Release APIX data cable (blue) first.
- While connecting: Connect APIX data cable (blue) at the last.
Unlock and disconnect the blue plug connection (2).
Unlock plug connection (1) and disconnect.