Install the rail pressure sensor
- Oil the thread and the cone on the rail pressure sensor (2).
- Install and tighten the rail pressure sensor (2).
TIGHTENING TORQUES SPECIFICATION
| Rail pressure sensor to rail | ||
| Sensor | Tightening torque | 32.5 Nm |
- Connect and lock the connector (1).
The connector (1) must engage audibly.
- Check rail pressure sensor (2) for tightness.
Follow-up work
- Refer to INSTALL THE IGNITION COIL OF THE FIRST CYLINDER
- Refer to INSTALL ACOUSTIC COVER .
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .