Install the tension strut on the right shock tower
NOTE:
Description is for left component only. Procedure on the right side is identical.
Install tension strut on shock tower
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Version A:
- Install the tension strut (3) on the shock tower.
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Tension strut on bulkhead | |
| M10x25 screw | Tightening torque 56 Nm |
- Replace screws (2).
Parts: Screws
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Tension strut to shock tower | |
| screw Replace screws. |
Joining torque 56 Nm Angle of rotation 90° |
- Version B:
- Install tension strut (3) on the shock tower.
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Tension strut on bulkhead | |
| M10x25 screw | Tightening torque 56 Nm |
- Replace the screw (2).
Parts: Screw
- Tighten down screw (2).
TIGHTENING TORQUES SPECIFICATION
| Tension strut to shock tower | |
| screw Replace screws. |
Joining torque 56 Nm Angle of rotation 90° |