Install transmission oil pan (all-wheel drive vehicle) (GA8HP75HZ)

NOTE: TECHNICAL INFORMATION 
The transmission oil pan must be replaced each time it is released.

• Clean the contact surface of the transmission oil pan on the transmission.
• Replace screws (1) to (14).

  Parts:  Screws

• Position the transmission oil pan.
• Hand-tighten the bolts.
• Tighten the screws in order from (1) to (14).

TIGHTENING TORQUES SPECIFICATION

Transmission oil pan
M6 Replace screws.	tightening torque  10 Nm

Fig 1: Transmission Oil Pan Screws Tightening Sequence

Courtesy of BMW OF NORTH AMERICA, INC.

• If necessary, tighten the oil drain plug (1).

TIGHTENING TORQUES SPECIFICATION

Oil drain plug
M18 Replace screw.	tightening torque  8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.