Position the mobile table lift
- Vehicle to be sufficiently loaded with sandbags (1) in the front section.
- Position the mobile lifting table 2 184 136
under the vehicle.
- Position the mounts on the front subframe as shown.
- Bring mounts into contact by twisting.
- Position the mount (1) as shown on the automatic transmission.
- Bring the mount (1) in contact by twisting.
- Position the mount on the transmission cross member as shown.
- Bring mounts into contact by twisting.
- Position the mount on the transmission cross member as shown.
- Bring mounts into contact by twisting.
- Position the mount on the transmission cross member as shown.
- Bring mounts into contact by twisting.NOTE: Perform the steps on the left and right side.
- Position mounts for the swivel bearing (1) on the swivel bearing.
- Hand-tighten the screws (2).







