Connecting the connector to the servomotor of the rear axle differential
- Attach the cable on the holder (3).
- Connect and lock all connectors (1) and (2).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Secure the cable to the heat shield (2) and position the heat shield (2).
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Heat shield to servomotor holder |
| M5 |
tightening torque
4.5 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|