Partially installing the fuel filler pipe
- Position the fuel filler pipe (1) on the coarse thread bolt (2).
- Position the fuel filler pipe (2).
- Tighten nuts (1).TIGHTENING TORQUES SPECIFICATION
Fuel filler pipe to inner wheel arch section Plastic nut Tightening torque
3.5 Nm - Tighten nut (1).
TIGHTENING TORQUES SPECIFICATION
| Fuel filler pipe to outer wheel arch section | |
| Nut M6 | Tightening torque 8 Nm |
- Mount the gas cap (1).
- Attach the retaining strip (2) in the direction of the arrow.



