Install instrument panel trim
NOTE:
TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.
Conduct the following operation with the assistance of a second person.
- Insert the instrument panel trim in the vehicle and position it at the support.
- Insert the associated wiring harnesses and connect the connectors.
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Dashboard to support screw Tightening torque
2.4 Nm - Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Dashboard to support screw Tightening torque
2.4 Nm - Open glovebox.
- Tighten the screws (1).TIGHTENING TORQUES SPECIFICATION
Dashboard to support screw Tightening torque
2.4 Nm - Tighten the screws (1) at the back of the glove compartment.TIGHTENING TORQUES SPECIFICATION
Dashboard to support screw Tightening torque
2.4 Nm - Connect all plug connections and cable clips (arrows) behind the glove compartment.NOTE: Perform the steps on the right and left side.
- Tighten down screw (2).TIGHTENING TORQUES SPECIFICATION
Dashboard to support screw Tightening torque
2.4 Nm - Use sound insulation (1).
- Connect the air hose (1) of the glove compartment to the connection (2) on the heating and air-conditioning unit.
