Install the left front-end strut

Installing the front-end strut 

• Install the front-end strut (3).
  NOTE: RISK OF DAMAGE 
  Use of an incorrect tool (impact screwdriver) to release and tighten the screws. 
  Damaged thread. 

  • Only use a standard tool (e.g. reversible ratchet) to release/tighten the screws.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clean the thread at shock tower.
• Replace the screw (1).

  Parts:  Screw

• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front-end strut to cross connection
  Hexagon screw Replace screw.	Joining torque  28 Nm Angle of rotation  90°

• Replace the screw (2).

  Parts:  Screw

• Tighten down screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Front-end strut/strut brace
  Screw Replace screw.	Tightening torque  56 Nm Angle of rotation  90°

• Repair the damaged thread on the shock tower with a Helicoil insert.