Install the left and right transverse control arm

Install the control link 

• Position the control link (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Make sure that, while installing the toe link (1), the conical side (2) of the rubber mount points in the direction of the wheel carrier (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: TECHNICAL INFORMATION 
  Tighten the screw connection in the NORMAL POSITION .
• Replace screws (1) and (2).

  Parts:  Screws

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the bolts (1) and (2) and screw in by hand force.
• Tighten the screw (1) in NORMAL POSITION .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Control link to control link bearing bracket
  M12 Replace screw. Tighten in NORMAL POSITION .	Joining torque  100 Nm Angle of rotation  90°

• Tighten the screw (2) in NORMAL POSITION .