Remove wiring harness

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.

Loosen screws (1).
Release the cable (2).
Removing balance weight (3)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.
Disconnect the plug connection for the vibration actuator.
Fold open foam material (1).
Loosen screws (2).
Release the grounding cable (arrow)
Remove vibration actuator (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connection (1) and disconnect.
Unlock and unplug the plug connection (3) if necessary.
Disconnect grounding cable (2).
Loosen screw (4).
Feed out wiring harness and remove.

Courtesy of BMW OF NORTH AMERICA, INC.