Removing the trim panel for the storage shelf
Preliminary works
- Remove both c-pillar TRIM PANELS
- Remove left and right backrest SIDE SECTION .
- Remove rear SEAT BENCH .
- Version with SA416:
- Release the screws (1) in the luggage compartment.
- Loosen screws (1).
- Feed out the seat belt end fittings (2) from the body.
NOTE:
The description is for one component only. The procedure is identical for all further components.
- Unclip the cover (1) in direction of arrow.
- Feed out the belt feed trim (2).
- Loosen the expanding rivet (1).
- Lift the trim panel (2) for the parcel shelf a little and unlock and disconnect the underlying plug connections.
- Remove the trim panel (2) for the parcel shelf to the front and feed out the seat belts (3).
