Removing the trim panel for the storage shelf

Removing both C-pillar trim panels 

Remove C-pillar trim panel 

• Disengage the C-pillar trim panel (1) inward from the clamp (2) and the clips (3).
• Feed the C-pillar trim panel (1) out and upwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Removing left and right backrest side section 

Remove armrest side section 

• Grip behind backrest side section (1) from above and unclip backrest side section (1) to the front from detent (2).
• Guide out the backrest side section (1) from the rear seat in arrow direction and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rear seat bench 

Remove rear seat bench 

• Unclip the rear seat in the area (1) upwards from the detents.
• Unlock and disconnect the plug connections in area (2).
• Remove the rear seat and thereby feed out the lower straps (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rear seat backrest 

• Loosen screws (1).
• Detach the rear seat backrest (2) upwards out of the guides (3).
• Feed out and remove the rear seat backrest (2) from the safety belt.

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the trim panel for the storage shelf 

• Version with SA416: 

  Release the screws (1) the trunk.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1).
• Guide out seat belt end fittings (2) from the body.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: The description is for one component only. The procedure is identical for all further components.
• Unclip the cover (1) in arrow direction.
• Feed out the seat belt finisher strip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen the expanding rivet (1).
• Lift the trim panel (2) for the rear shelf a little and unlock and disconnect the underlying plug connections.
• Remove the trim panel (2) for the rear shelf to the front and feed out the safety belts (3).

Courtesy of BMW OF NORTH AMERICA, INC.