Secure the wishbone on the top left and right on the swivel bearing
NOTE:
Perform the steps on the right and left side.
Secure the top wishbone on the swivel bearing
- Position upper wishbone (3) on the swivel bearing (4).
- Replace the screw (2) and the nut (1).
Parts: Bolt, nut
- Insert screw (2).
The screw (2) must be positioned in the groove of the pin from the top control arm (3).
(F) = driving direction
- Tighten nut (1).
TIGHTENING TORQUES SPECIFICATION
| Upper wishbone to swivel bearing | |
| M10 Replace screw and nut. |
Tightening torque 56 Nm |
