Securing the bottom wishbone on the left and right to the front subframe

NOTE: Perform the steps on the right and left side.

NOTE: TECHNICAL INFORMATION 
Tighten the screw connection in the NORMAL POSITION .

• Position the wishbone at the bottom of the front subframe.
• Replace screw (2) and nut (1).

  Parts:  Bolt, nut

• Tighten the nut (1) in the NORMAL POSITION .

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUES SPECIFICATION

Lower wishbone to front axle carrier
M14 Replace screw and nut. Tighten in NORMAL POSITION .	Joining torque  85 Nm Angle of rotation  180°